Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for CAN bus. It is discrete, does not use LED indicators or key fobs and is concealed in the vehicle's wiring.
It also allows users to disable the system temporarily through Transport Mode to use it when they are renting out their vehicle. This guide will walk you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against key cloning, hacking and relay attacks. The system is directly connected to your car's ECU and is protected by a unique PIN code that you can choose. It is not detected by thieves using diagnostic scanners and other modern methods. It isn't able to be disabled using circuit cuts.
The system is easy to use, however it's important to have an expert installation to ensure a secure and secure connection with your vehicle's ECU. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm system to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits The installer must first disconnect your battery. Once the battery is disconnected, the installer can be able to work safely. Basic hand tools are helpful to make precise connections and a multimeter may be used to verify electrical values and ensure safety. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. The user's manual offers specific instructions specifically tailored to your Ghost Immobiliser model.
It is important to choose an area for grounding that is free of dirt or paint during installation. The installer must ensure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. The wires can be plugged in or soldered depending on the model. A quality connector is recommended to ensure a sturdy and secure connection.
After the installation is completed Once the installation is completed, the customer can enable Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. The customer has to press the icon for service on the dashboard five times within 2 seconds. Once this is done, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a smart option for anyone who regularly rents out their cars on platforms such as Turo. An immobiliser can reduce insurance costs, since it decreases the likelihood of theft.
Getting Started
You won't have a problem with an autowatch ignition device if you want to protect your car from thieves. It protects your vehicle from being started even if a criminal steals or copies the key. It's possible because of its advanced technology that prevents the engine from starting until the right PIN code has been entered.
The device works by connecting to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering wheel to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the ultimate system to safeguard your pride and joy. It will ensure that your car's value remains intact in the event that you decide to sell it.
Installing a Ghost immobiliser is easy however, you must follow the directions to avoid electrical problems and malfunctions in the system. First, you must locate and identify a constant 12V power source and a good grounding point on the chassis of your vehicle. After that, you are able to begin to connect the wires that will be used to activate the immobiliser. Use high-quality connectors, and soldering techniques for a solid connection. Connect the connections with heat shrink tubing, insulation tape or other materials to avoid short circuits of electricity.
Once the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser is functioning. After you've confirmed that everything is working properly and you are satisfied, you can place the immobiliser in a secure place inside the vehicle. Be sure to conceal it securely so that a thief cannot get it into a compromising position.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a high-quality deterrent to car burglars. It is impervious to hacking and key cloning and cannot be disabled without a code. The device is also easy to use and is able to be put into a service valet mode so that your automobile is not activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. This is due to the fact that it doesn't transmit and receive radio frequency signals, and it utilizes CAN data to communicate with your ECU. It doesn't require any modifications to your existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. After this, you can start your vehicle and leave safely.
Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking, while protecting the value of your car's pride and joy. If you ever need to hand over your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need find an energy source that is constant (12V) and an earthing point. Be sure that both are properly insulated and can be touched. Cable ties are also recommended to secure the wires. This will reduce the chance of theft by thieves. Be sure to double-check the location of these points to avoid committing a mistake and mark them with the help of tape or a label. It's important to inspect every connection for signs of wear and tear. Connectors that are loose could cause problems with the system, so be certain that they are securely in place and securely insulated. Don't forget to test the Ghost Immobiliser after installation is complete. what is a ghost immobiliser will make sure that the unit functions properly and that all connections and insulation are secure. If you encounter any issues, make sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your car's ECU in order to prevent unauthorised motor starting. ghost immobiliser and tracker protects your car against hacking, key cloning, and other methods that thieves employ to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to offer the ultimate protection for your vehicle. The Ghost's unique features and discreet design make it a popular option for car enthusiasts and security-conscious motorists alike.
It is essential to follow the procedures for installation to ensure correct integration of the Ghost Immobiliser. Check the wiring diagram of your vehicle as it will aid you in locating and connecting the wires. After that, you'll need identify the power source and grounding points. Once you've identified these, you'll need to mark them so that they're easy to identify during the installation process. It is also essential to use high-quality tools and materials. Basic hand tools can help with making precise connections, while a multimeter will verify electrical values and ensure security. Insulation tape and cable ties will keep the connections neat and tidy. Additionally, a user's manual will provide specific instructions specific to your Ghost model.
It is important to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This will ensure that the immobiliser works in the way it was intended, preventing unauthorized vehicle starts. This step should be done frequently as part of your regular inspections of the vehicle to ensure the system is always working correctly.
Once the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it, ensuring that nobody can take off with your vehicle without the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that identifies any attempts at theft or tampering. This allows you to locate your car if it's stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with the majority of major brands. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for installing our products. This reassures customers, insurers and law enforcement agencies that all installations are completed safely and correctly.